Description
High Functionalities
①2 models are lined up by a combination of 12-stationed turret-type tool post with 3-axis control and 4-stationed turret-type tool post with B-axis control.
②Type D is mounted with a 4-stationed turret-type tool post with B-axis
control which is capable of simultaneous 5-axis processing on both the front and back sides.
③The main and sub spindles can be mounted with power chuck to enable the processing of the cast or forged workpieces.
Operability and Workability
①The short distance from the front side of the machine to the spindles improves operator workability.
②The swing type control panel mounts a large, 15-inch touch panel display.
③Program checking function enables verification beforehand by 3D simulation.
High Rigidity and Accuracy
①The slide of the X-axis of each tool post adopts the square type slide guideway structure to improve the post rigidity.
②The power tool of the 12-stationed turret-type tool post is designed with one position drive mechanism.
③The thermal data from multiple locations of the machine enables highly accurate and flexible thermal displacement correction.
型号 | SK-51 Type A | SK-51 Type D | |||
主轴 | 最大加工直径 | Φ51mm | |||
最大加工长度 | 125mm | ||||
主轴转速 | Max. 5,000min-1 | ||||
副主轴 | 最大加工直径 | Φ51mm | |||
最大接取制品长 | 125mm | ||||
最大制品突出长 | 80mm | ||||
主轴转速 | Max. 5,000min-1 | ||||
PARH 1 刀架台 | 形式 | 12面刀塔 | |||
刀具把数 | 车刀 | □20mm | |||
Max. 2本/面 | |||||
套筒 | Max. 3本/面 | ||||
动力刀具 | Max. 2本/面 | ||||
动力刀具 | 转速 | Max. 6,000min-1 | |||
最大钻孔 | Φ16mm | ||||
铣削 | Φ20mm | ||||
PARH 2 刀架台 | 形式 | 12面刀塔 | 4面刀塔(附B轴控制) | ||
刀具把数 | 车刀 | □20mm | |||
Max.2 本/面 | Max.1把/上pos. | ||||
Max.2把/下pos. | |||||
| Max.3 本/面 | Max.1把/上pos. | |||
套筒 | Max.2把/下pos. | ||||
动力刀具 | Max.2 本/面 | Max.2把/下pos. | |||
动力刀具 | 转速 | Max. 6,000min-1 | |||
最大钻孔 | Φ16mm | Φ13mm | |||
铣削 | Φ20mm | Φ18mm | |||
PARH 3 刀架台 | 形式 | —— | 12面刀塔 | ||
刀具把数 | 车刀 | —— | □20mm | ||
—— | Max. 2把/面 | ||||
套筒 | —— | Max. 3把/面 | |||
动力刀具 | —— | Max. 2把/面 | |||
动力刀具 | 转速 | —— | Max. 6,000min-1 | ||
最大钻孔 | —— | Φ16mm | |||
铣削 | —— | Φ20mm | |||
速进给速度 | X1、X2、X3 | 20m/min | |||
Y1、Y2、Y3 | 15m/min | ||||
Z1、Z2、Z3、ZB | 40m/min | ||||
机械尺寸(长× 宽 ×高) | 2,800 × 2,070 × 2,130 mm | ||||
机械重量 | 6,600kg | 7,200kg |