BROTHER SPEEDIO NC Rotary Table T-200A

 

High accuracy
High-accuracy machining achieved by mechanism with no backlash.

High productivity
Achieved by the maximum speed of 100 min-1.

Extended service life
Permanent high accuracy with very little deterioration over time.

 

Categories: , ,

Description

Specifications

TypeRight-handed, Left-handed*1
Through hole diameter70H7mm /2.8H7inch
Center height170mm /6.7inch
Gear ratio1/20
Maximum speed100min‒1 (50min‒1*2)
Bi-directional positioning accuracy (ISO230-2 compliant)20s or less
Bi-directional positioning repeatability (ISO230-2 compliant)10s or less
Indexing accuracy*310s or less
Repeatability*34s or less
Maximum loading capacity100kg /220lbs (200kg / 440lbs *4)
Allowable work inertia1.0kg・m2 /23.7lbs・ft2 (4.0kg・m2 /94.8lbs・ft2 *2)
Allowable unbalanced load5.0kg・m /36.2ft・lbs
Clamp methodPneumatic
Clamp torque280N・m /207ft・lbs (at 0.5Mpa)
Maximum holding torque *5720N・m /531ft・lbs (at 0.5MPa)
Product weight61kg /134lbs
Applicable modelsS300X2 (X1) / S500X2 (X1) / S700X2 (X1) / S1000X1/ W1000Xd1 *6 / R450X2 (X1) / R650X2 (X1) / F600X1
  • *1:Only right-handed type available for R450X2(X1) and R650X2(X1).
  • *2:When high inertia mode (enabled by changing parameter setting) is used.
  • *3:Based on Brother measurement standard.
  • *4:When support table is used.
  • *5:Obtainted by the clamp torque plus the motor’s holding torque.
  • *6:T-200Ad is available for W1000Xd1.

Related products