TAMURA Reflow System-TNR Series N2

Description

FEATURES

-High performance N2 lead-free reflow system.
-Temperature difference between points of mounted boards is minimized by the adoption of special panel heaters arranged on the top and bottom surfaces.
-Free preparation of HAT profile with seven zone configuration heating system (Trapezoidal profile).
-Rapid quench profiles are made possible by the adoption of forced convection cooling mechanisms built inside heat exchanger, 2 zones.
-Easy operation by personal computer control.

SPECIFICATIONS

TNR25-537PH

TNR40-577PH

TNR50-577PH

Applicable boardsMAX.W250×L330(mm)
MIN.W 50×L 50(mm)
MAX.W400×L600(mm)
MIN.W 50×L 50(mm)
MAX.W500×L600(mm)
MIN.W 50×L 50(mm)
Component heightUpper MAX.20mm
Lower MIN.20mm
Upper MAX.20mm
Lower MIN.20mm
Upper MAX..20mm
Lower MIN.20mm
Circuit board height allowance4mm(Minimmum of 2.5mm when warping is prevented*)4mm(Minimmum of 2.5mm when warping is prevented*)4mm(Minimmum of 2.5mm when warping is prevented*)
N2 Gas supply99.99% 0.4 – 0.7MPa
250NL/min
99.99% 0.4 – 0.7MPa
500NL/min
99.99% 0.4 – 0.7MPa
500NL/min
Flow height from floor900±20mm900±20mm900±20mm
Power sourceAC 200V-50/60Hz-3Φ 63kVA
(at sequential start 30kVA)
AC 200V-50/60Hz-3Φ 81kVA
(at sequential start 55kVA)
AC 200V-50/60Hz-3Φ 81kVA
(at sequential start 55kVA)
Dimensions of machineW1100×L5300×H1350(mm)W1320×L5700×H1350(mm)W1320×L5700×H1350(mm)
Weightapprox.2000kgapprox.2500kgapprox.2500kg
*Overall length increases by 50cm with the anti-buckling installed
(Type:TNR25-587PH)
*Overall length increases by 20cm with the anti-buckling installed
(Type:TNR40-597PH)
*Overall length increases by 20cm with the anti-buckling installed
(Type:TNR50-597PH)